Listen to our customers…
Everyone knows what it’s like to have the heating on for ages and yet still feel a cold chill at your feet. You check all the doors and windows but it’s actually the radiators that are just not working properly. Your rooms don’t seem to heat up, no matter how long the heating is on!
Don’t worry – you are not alone. It’s very common and very frustrating… in fact, the main reason you are here right now is probably because you can’t face ringing your plumber again.
Well before we go any further, let’s clear up a few things first. All the components in your heating system probably work well independently… but when assembled as one unit, they don’t function collectively. So you don’t need a new boiler, new radiators or a new plumber… and you definitely don’t need to spend thousands ripping up your house for a new heating system!
You just simply need Oxyvent.
Read more about
Do your own home test
Here’s a simple test you can do to find out how effective your radiators work. Switch on the heating and wait for 1 hour. Then carefully check the middle lower section of all the radiators with your hand. You will notice that the further away from the boiler you go, the easier that section becomes to touch. Now carefully place your hand on the two pipes going into each radiator to check their temperature. Again you will notice a large temperature difference the further away the radiator is from the boiler.
If this is the case with your home, then there is no way that your heating system can currently heat all the rooms efficiently. If the centre lower section of the radiator is cold, then your feet are cold and that’s just not the kind of comfort you expect or desire. The only way to get your radiators to produce a more efficient heat and make your whole house feel cosy is with Oxyvent.
Unwanted call backs to common problems with heating systems are very annoying and time wasting for both Plumber and customer. Some of the usual suggestions to fix them include:
- Flushing radiators – to get the sludge out of the radiators.
- Balancing radiators – taking heat from one radiator to try and get another one working.
- Bleeding/Venting of radiators
- Air locks
- Thermostatic Radiator Valves not working
In over 19 years of installing Oxyvent, my customers have rarely had to deal with any of these issues.
What our customers have to say
We answer your questions
Where Underfloor Heating is installed with a gas or oil boiler, hot and cold patches on the floor are quite common. It can get very uncomfortable when the floor overheats. What can we do about it?