 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Installation
The Oxyvent Tank is the most cost effective and energy efficient product available.
When you consider the benefits and fuel saving it can easily be seen that The Oxyvent Tank will recoup its cost in a relatively short time.
The Oxyvent Tank can be ordered directly from Oxyvent Limited and delivered to your door. We supply direct in order to give a good customer service and detailed drawings for any unusual situation. A full installation manual comes with The Oxyvent Tank. If there is any situation not covered in the manual please contact Oxyvent directly and we will be pleased to advise on all matters.
The Oxyvent Tank is suitable for Oil, gas, and solid fuel, geothermal, radiators, and underfloor heating.
Typical installation diagram of The Oxyvent Tank
The Oxyvent Tank is installed near the boiler/in the hot press or in a suitable position available.
Installation
The Oxyvent Tank is easy to install and is placed at the centre of the heating systems where flow and return pipes from the boiler, radiators, domestic hot water tank etc meet.
The Oxyvent Tank clearly identifies where each pipe is connected. It is a matter of connecting each pipe to it proper port, it is as easy as that.
The Oxyvent Tank is suitable for all houses, pressurised and open vented systems with a maximum working pressure of 3 bar.
Dimensions: 375mm high x 295mm sq. (15" x 12")
Weight: 28 Kg
Output: 150,000 BTU/Hr - 43.95kw
If a higher output is required please contact Oxyvent.
There are many types of heating system arrangements available (including combined systems). Should you have any doubts or concerns please contact Oxyvent and we will be pleased to advise.
It is the policy of Oxyvent Limited to offer a quality service to our customers and provide a full backup service to installers. If any problem arises feel free to contact our team of qualified Heating Engineers for assistance.
The Oxyvent Tank is designed to zone your heating system properly to conserve energy. It has three zones
on the standard tank e.g.
Zone 1 - Domestic Hot Water
Zone 2 - Living Area
Zone 3 - Bedrooms
Where extra zones are required please contact Oxyvent.
home • environment • about us • news & reviews • certification • radiators
domestic hot water • underfloor heating • boilers • installation • contact us
Site copyright of Oxyvent © All rights reserved
Back to top
