What You Need To Know Before You Build
Get your Installer to zone your house properly ie. Bring the flow and return pipes from the living area, bedrooms, hot water tank and boiler back to one central point. By doing this if a problem arise you will have access to the zones. You cannot go wrong with this piping system.
Set up your system to produce radiant heat from the radiators. By placing the clip on pipe thermometer supplied with the Oxyvent tank on the pipe leaving the boiler. This is used as a guild to make sure that the boiler stay in condensing mode 100% of its operating time.
The Oxyvent system is self-balancing to 2°C. This will produce more powerful radiant heat from the front panel of the radiators. The temperatures at ground level will be higher. The thermostatic radiator valves will be move active giving them more control over the room temperature. The occupant will have a higher comfort level.
Oxyvent will give the Installer confidence to produce nice neat work that will operate efficiently and perform well in all aspects and continue to do so.
Remember even though your installing a new system in your home, you will encounter the usual problems unless you install the Oxyvent system. Contact Oxyvent if you need any advice.